434 Small Block Chevy Big Dawg Pump Gas Engine
Pump Gas

434 Small Block Chevy Big Dawg Pump Gas Engine $17,350

Ultrastreet Big Dawg
434/700HP $17,350
Less Carb & Ignition

We Built A Few Of These By Special Request For A Couple Of Local Street Racers And The Results Were So Incredible (And Profitable For Them) That We Decided To Offer It To Everyone Just To Be Fair. Available With Plain Valve Covers And Heads With No Visible Markings For Those That Need To Keep It Under Wraps. Or Just Leave It "As Is" and Shout It Out To The World!

  • Horsepower
  • Torque
  • Bore & Stroke
  • Compression Ratio
  • Fuel Requirement
  • 700 @ 6600 RPM
  • 595 @ 5400 RPM
  • 4.155 x 4.000
  • 10.95 to 1
  • 92/93 Octane

  • Dart Little "M" Block w/4 Bolt Splayed Caps
  • SSRE/Scat 4340 4.000" Stroke Steel Crank (1)
  • Scat 4340 6.000" H-Beam Steel Rods
  • Clevite 77 "H" Series Main & Rod Bearings
  • Wiseco Custom 10.95-1 Forged Aluminum Pistons
  • 043/043/3MM Total Seal Plasma Moly Ring Set
  • SSRE/Comp Cams Custom "Street Roller" Camshaft (2)
  • Comp Cams Solid Roller Lifters
  • Cloyes Billet True Roller Timing Set w/Torrington Bearing
  • AFR 245 "NPP" Fully CNC Ported Aluminum Heads
  • PAC Racing 1.550" Roller Springs
  • Titanium Retainers & 10° Locks
  • ARP Head Studs w/12-Point Nuts
  • T&D Shaft Rockers
  • Chromemoly (1) Piece .080" Wall Pushrods
  • FelPro HP Head Gaskets w/Pre-Flattened Steel Wire
  • Motown "SuperMod" Ported Dominator Intake Manifold
  • SSRE/Milodon Pro Series Windage Pan w/Kickout
  • Moroso Race Prepped Oil Pump w/Tig Welded HD Pickup
  • GM Performance Chrome Front Cover w/Billet Timing Pointer
  • Hi-Performance Fully Degreed Harmonic Balancer
  • Complete Assembly Internally Balanced
  • Individually Dyno Tested & Tuned
  • Actual Dyno Sheet Provided
  • Footnotes:
  • (1) Precision machined in USA to our custom specifications.
  • (2) Composite Fuel Pump Rod Required with our custom camshafts.
Holley Stealth EFI Package$2995
Includes: Holley Super Sniper EFI Unit, Sniper EFI Touchscreen LCD Programmer, Bosch LSU 4.9 Wideband Oxygen Sensor, Stainless Steel Clamp-On Oxygen Sensor Installation Kit (May Also Be Welded), Hyperspark Distributor and SSRE Custom Ignition Wires w/Looms. Base Tuneup and Parameters Set and Calibrated on Your Engine.
Igniton Components
Hyperspark Ignition Coil $39
Nitrous Package $925

Planning On Adding Nitrous? We've Put Together A Preferred Option Package Of Our Most Popular And Highly Recommended Heavy Duty Components ... With The Added Bonus Of Savings!!


●  Manley 4340 Non-Twist Forged & Nitrided Crank $125
●  Molnar Severe Duty 4340 H-Beam Rods w/ARP 2000 Asymmetrical Bolts $400
●  Calico Coated Bearing Package $150
●  Total Seal TNT "Hellfire" Rings $175
●  Cometic MLS (Multi Layered Steel) Head Gaskets $125

Total Package Value = $975 - Save $50!

Fuel System Components
Why Buy A Carburetor From Us?

Yes, you can certainly purchase a stock carb from the big mail order companies but we've seen carbs out of the box down on power as much as 40HP and between 15-20HP is common. That's why we disassemble and blueprint EVERY carburetor before we ever bolt it on your engine. We then tune, adjust and jet your carb on your engine so you get every ounce of power that you paid for.

Even if you're considering one of our Engine Kits or simply looking for a replacement carb, the same blueprint work is done and we dyno test it on a comparable engine to yours before it ships!
 $Priceless
APD 1050 CFM 4500 Series Carb Package includes: 2 Circuit Billet Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.Image Close$1395
APD 1175 CFM 4500 Series Carb Package includes: Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.Image Close$1395
Mechanical Fuel Pump Package Includes: High Volume Race Design 6 Valve Pump, Composite Fuel Pump Rod (Required For Our Custom Cams), Braided Fuel Line Inlet Kit w/8AN Lines and Fittings. Plumbed, Installed & Dyno Tested On Your Engine. $475
Igniton Components
MSD Electronic Ignition Package Includes: MSD Pro Billet Distributor, Hi Perf Gear, Custom Moroso 8mm Wire Set. Custom Curved and Calibrated To Your Engine. $595
MSD 6AL Digital Electronic Ignition Box w/Hi-Speed Rev Limiter $305
MSD 6AL-2 Digital Electronic Ignition Box w/Launch Control & Hi-Speed Rev Limiter $480
MSD Blaster 3 Hi Performance Ignition Coil w/HEI Style Post $65
MSD 8201 Pro Power Coil $159
Composite Distributor Gear (if required)Image Close$125
Blocks
Brodix Aluminum Block w/Steel Billet Caps, Special Head Stud Kit & Additional Machining (Slightly Less Peak HP) $4500
HIP® Process (Hot Isostatic Pressing) For Increased Durability With Aluminum Blocks $675
Crankshafts
Manley 4340 Non-Twist Forged & Nitrided Crank $125
Connecting Rods
ARP 2000 Rod Bolts $125
Manley H-Beam 4340 Steel Rods w/ARP 2000 Bolts $300
Molnar Severe Duty 4340 H-Beam Rods w/ARP 2000 Asymmetrical Bolts $400
Oliver Steel Billet Rods $1295
Callies Ultra I-Beam 4330M Timken Steel Rods $1320
Pistons - Pins - Rings - Bearings
Severe Duty JE Pistons (Suitable For Over 250HP Nitrous) $295
Total Seal TNT "Hellfire" Rings $175
Calico Coated Bearing Package $150
Lifters
HIPPO Severe Duty Roller Lifters w/Hi-Pressure Pin Oiling (Extended Lifter Life) $295
Morel "Black Mamba" Needleless Roller Lifters $695
Valvetrain
Needle Bearing Tip Option for T&D Shaft Rockers $295
Timing
Cloyes 2 Piece Aluminum Timing CoverImage Close$175
Jesel Belt Drive (Includes Mandatory Block Machining) $1210
Oil Pumps - Oil Pans - Vacuum Pump
Lokar Custom Locking & Calibrated Dipstick (Upgrade)Image Close$95
Vacuum Pump Kit Includes: Moroso 3 Vane Vacuum Pump & Adjustable Relief Valve, Breather Tank, AN Fittings, Jones Mandrel & Bracket Kit w/Radius Tooth HTD Belt. Image Close$1395
Additional Parts - Labor - Accessories
Cometic MLS (Multi Layered Steel) Head Gaskets $125
SFI Approved Harmonic Balancer (Required At All Race Tracks) $150
ATI SFI Approved Super Damper Balancer (Includes Hone To Fit Labor) $295
Master Power Silent Drive Vacuum Pump Kit For Power BrakesImage Close$589
SFI Heavy Duty Flexplate & ARP Bolt Package $150
Boninfante Severe Duty SFI Flexplate & ARP Bolt PackageImage Close$229
Boninfante SFI Billet Flexplate & ARP Bolt PackageImage Close$395
PowerMaster Hi-Torque Mini StarterImage Close$229
Painless Performance Hot Shot Relay Kit (Recommended for above starter) $39
Edelbrock Aluminum "High Volume" Mechanical Water Pump (Short or Long Version)Image Close$350
Meziere 55GPH Electric Water PumpImage Close$535
Billet Specialties Tru Trac Serpentine SystemImage Close$Call
Billet Specialties V-Track Pulley SystemImage Close$Call
Custom Powder Coating Packages Available $Call