582 Big Block Chevy Hydraulic Roller Drag Race Engine

582 Big Block Chevy Hydraulic Roller Drag Race Engine

Hydraulic Roller

582 Big Block Chevy Hydraulic Roller Drag Race Engine
Shown With Optional Equipment
582/975HP $17,195
Less Carb & Ignition

They Said It Was Impossible ... They Said It Couldn't Be Done. After A Year Of R&D And Testing With Several Major Manufacturers We Came Up With A Proprietary Design Hydraulic Roller Race Engine That Produces Almost 1000 HP With All The Simplicity And Low Maintenance Of Your Every Day Street Car. Just Imagine Relaxing Between Rounds (Or Between Race Weekends) And Having Complete Confidence In Your Equipment Without Worrying About Adjusting Valves, Checking Springs Or Breaking A Lifter!

Million Dollar Results For A Lot Less!

  • Horsepower
  • Torque
  • Bore & Stroke
  • Compression Ratio
  • 975 @ 7200 RPM
  • 815 @ 5800 RPM
  • 4.600 x 4.375
  • 14.5 to 1

$ 750 Off Our Regular Price - Sale Price $ 16,445
  • Dart Big "M" Low Deck Block w/.904 Lifters & 4 Bolt Splayed Caps
  • SSRE/Scat 4340 4.375" Stroke Steel Crank (1)
  • SSRE/Scat 4340 6.535" H-Beam Steel Rods w/L19 Bolts (2)
  • Clevite 77 "H" Series Main & Rod Bearings
  • Wiseco 14.5-1 Gas Ported Pistons w/.043 Rings
  • Total Seal Plasma Moly Ring Set
  • SSRE Custom Steel Billet  Hydraulic Roller Cam
  • Proprietary .904 Short Travel Hydraulic Roller Lifters
  • Rollmaster Billet Timing Set w/IWIS Chain & Torrington Bearing
  • Brodix BB3X 366cc Fully CNC Ported Aluminum Heads
  • Manley 2.300/1.880" Titanium Valves with 5/16" Stems
  • Isky Custom Design "Special Process" 1.550" Roller Springs
  • Titanium Retainers & 10° Locks
  • ARP Head Studs w/Parallel Ground Washers
  • Scorpion Race Series Aluminum Roller Rockers
  • FelPro HP Head Gaskets w/Pre-Flattened Steel Wire
  • Merlin X "New Design" Dominator Intake Manifold
  • SSRE/Moroso Custom Stroker Oil Pan w/Windage Tray
  • Moroso Race Prepped Pump w/Tig-Welded HD Pickup
  • GM Performance Chrome Front Cover w/Billet Pointer
  • SFI Approved Harmonic Balancer
  • Complete Assembly Internally Balanced
  • Individually Dyno Tested & Tuned
  • Actual Dyno Sheet Provided


2014 Million Dollar Race Winner



2013 Super Bucks Race Winner



May 4, 2013 ATCO: 7.28 @ 182 MPH !

Read The National Dragster Engine Article Here!

Article Used With Permission From National Dragster©. All Rights Reserved.

Bells & Whistles Package$2350

Do You Want All The Bells & Whistles? Then This Is The Package For You! Package Includes A Jesel Belt Drive, MSD Crank Trigger, An Installed Moroso Vacuum Pump Kit And Sheet Metal Valve Covers (Sheet Metal Valve Covers Where Applicable).


●  MSD Crank Trigger Ignition Upgrade$295
●  Jesel "Solid One Piece" Belt DriveImage Close$895
●  Vacuum Pump Kit Includes: Moroso 3 Vane Vacuum Pump & Adjustable Relief Valve, Breather Tank, AN Fittings, Jones Mandrel & Bracket Kit w/Radius Tooth HTD Belt. Image Close$1075
●  SSRE Engraved Sheet Metal Valve CoversImage Close$350

Total Package Value = $2615 - Save $265!

Fuel System Components
Why Buy A Carburetor From Us?

Yes, you can certainly purchase a stock carb from the big mail order companies but we've seen carbs out of the box down on power as much as 40HP and between 15-20HP is common. That's why we disassemble and blueprint EVERY carburetor before we ever bolt it on your engine. We then tune, adjust and jet your carb on your engine so you get every ounce of power that you paid for.

Even if you're considering one of our Engine Kits or simply looking for a replacement carb, the same blueprint work is done and we dyno test it on a comparable engine to yours before it ships!
$Priceless
QuickFuel 1150 CFM FX-4711 Carb Package includes: Carb w/Billet Metering Blocks & Throttle Body, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.$1195
QuickFuel 1250 CFM FX-4712 Carb Package includes: Carb w/Billet Metering Block & Throttle Body, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.$1250
APD 1150 / 1250 CFM 4500 Series Carb Package includes: Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.$1395
APD "Black Widow" 2" SpacerImage Close$100
MagnaFuel ProStar 500 Billet Gerotor Electric Fuel PumpImage Close$399
Igniton Components
MSD Electronic Ignition Package includes MSD Pro Billet Locked Distributor w/Ford HEI-Style Cap, Bronze Gear, Custom MSD 8.5mm Wire Set. Dyno Tested and Calibrated on your engine.$495
MSD Crank Trigger Ignition Upgrade$295
MSD 7AL-2 Electronic Ignition Box (Direct Plug-in For Our MSD Distributors)$559
MSD 8201 Pro Power Coil$122
Blocks
Dart Inner Valley Stud Kit (Improved Head Gasket Sealing)$95
Dart Steel Billet Main Cap Upgrade$450
Brodix/Dart Aluminum Block w/Special Head Stud Kit & Additional Machining
(Slightly Less Peak HP)
$4000
Crankshafts
Manley 4340 Non-Twist Forged & Nitrided Crank$250
Connecting Rods
Manley H-Beam 4340 Steel Rods w/ARP 2000 Bolts$175
Molnar Severe Duty 4340 H-Beam Rods w/ARP 2000 Asymmetrical Bolts$275
Pistons - Pins - Rings - Bearings
Total Seal TNT "Hellfire" Rings$175
Tool Steel "M2" Rings for Heavy Nitrous$395
Tool Steel "Heavy Wall" Wrist Pins$225
Calico Coated Bearing Package$150
Valvetrain
SSRE Stud Girdle w/CNC Machined 2-Piece Valvetrain Stabilizer & Locking Hex Head Adjusting Nuts$295
Timing
Cloyes 2 Piece Aluminum Timing CoverImage Close$175
Jesel "Solid One Piece" Belt DriveImage Close$895
Jesel "Original 2 pc" Belt Drive$1045
Nitrous Systems
SpeedTech Diffuser Plate Nitrous System - Installed$795
SpeedTech Liquid Force "Fogger Style" Nitrous System - Plumbed & Installed$1500
Oil Pumps - Oil Pans - Vacuum Pump
Moroso "Winged Design" Race Prepped Oil Pump (Requires Pro Pan)$50
Moroso HD Billet Aluminum Oil PumpImage Close$295
Moroso Kickout Style Pro Pan w/Solid Louvered Tray & Main Cap Partitions For Added Power & Oil Control.$250
Moroso Aluminum Pro Eliminator Pan$495
Vacuum Pump Kit Includes: Moroso 3 Vane Vacuum Pump & Adjustable Relief Valve, Breather Tank, AN Fittings, Jones Mandrel & Bracket Kit w/Radius Tooth HTD Belt. Image Close$1075
Additional Parts - Labor - Accessories
Cometic MLS (Multi Layered Steel) Head Gaskets$95
ATI SFI Approved Super Damper Balancer (Includes Hone To Fit Labor)$245
SFI Heavy Duty Flexplate & ARP Bolt Package$125
JW "The Wheel" Severe Duty SFI Flex PlateImage Close$269
PowerMaster Hi-Torque Mini StarterImage Close$229
Meziere 55GPH Electric Water PumpImage Close$450
SSRE Engraved Sheet Metal Valve CoversImage Close$350
Show Quality Polished Chrome Plated Finish For Sheet Metal Valve Covers (Additional Charge)Image Close$Call